: Indicating and Switch

Service intended

P690 differential pressure gauge series are designed to measure differential pressure from 25 kPa to 2.0 MPa at static pressure up to 10 MPa and have inductive contact. P690 series are designed to control alarm for differential pressure, providing the right time to replace air and sludge filter during the process.

Nominal diameter	160 mm
Accuracy	±1.6 % of full scale
Scale range (MPa, kPa, bar, mbar)	0 ~ 25 kPa to 0 ~ 0.25 MPa 0 ~ 0.4 MPa to 0 ~ 2 MPa
Static pressure	Max. 10 MPa
Working temperature	Ambient : -20 ~ 65 °C -40 ~ 65 °C (With silicone filling) Fluid : Max. 100 °C
Degree of protection	EN60529/IEC529/IP67
Temperature effect	Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±0.5 % per 10 ℃ of full scale

Standard features

Pressure connection	Stainless steel (316SS)
Element	Bellows Stainless steel (316L SS)
Case and cover	Stainless steel (304SS) Bayonet type
Dial	White aluminium with black graduations
Window	Polycarbonate
Pointer	Black painted aluminium alloy
Contact	Inductive contact
Conduit connection	M20 x 1.5P
Process connection	¼" NPT(F) ½" NPT(F) at 3-way and 5-way manifold valve
Standard accessories	Mounting bracket for 2” pipe Mounting with silver gray finished steel
Certificates	NEPSI Ex ia IIC T6 Ga KCS Ex ia IIC T6 Tamb = -25 ~ 56 ºC
Option	■ Remote seal ■ ½" (N)PT female conduit connection ■ ¾" (N)PT female conduit connection ■ Mounting bracket with 316SS for 2" pipe mounting ■ 3-way manifold valve (316SS) ■ 5-way manifold valve (316SS) ■ 3-way manifold valve (Monel) ■ 5-way manifold valve (Monel)

Download

Certificates

타이틀

P690 Series_Differential pressure gauge with inductive contact type

P690 Series

Attached files

Indicating and Switch

타이틀

Attached files

공유하기