본문 바로가기

Semiconductor

P810 Series (316L type)_Ultra high purity pressure gauge (EP grade)

P810 Series (316L type)

Service intended

P810 series are specially designed for the ultra-high purity gas distribution system used in a semiconductor, electronic, medical, biotechnology, and pharmaceutical industry.

Nominal diameter 35 (1½"), 50 (2") and 63 mm (2½")
Accuracy Grade A : 50 (2") and 63 mm (2½")
Grade B : 35 (1½"), 50 (2") and 63 mm (2½")
Scale range -0.1 ~ 0 to 0 ~ 28 MPa
Working pressure Steady pressure : 75 % of full scale value
Fluctuating pressure : 67 % of full scale value
Working temperature Ambient : -40 ~ 65 °C
Fluid : Max. 100 °C
Temperature effect Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately
±0.4 % per 10 ℃ of full scale

Standard features

Pressure connection Type 316L SS electropolished low mount or center back mount
surface finish Ra≤0.25 ㎛
■ ¼" NPT male thread
■ Swivel male or female face seal fitting
Element Type 316L SS
<6 MPa : C-type bourdon tube
≥6 MPa : Helical type bourdon tube
Case Type 304SS, Electropolished with pressure relief
Cover and window Twist-lock polycarbonate
Movement Stainless steel
Dial White aluminium with pointer stop pin
With black/red lettering, Dual pressure scale (bar/psi)
Pointer Black painted aluminium alloy
Helium leak rate Tested to confirm leakage rates of less than
10 mbar • ℓ/sec
Option 100 mm : P252 dimension
Certificates ATEX II 2G Ex h IIC T6...T1 Gb
ATEX II 2D Ex h IIIC T85°C....T450°C Db

© WISE Control Inc. All rights reserved. ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Download

CATALOG

MANUAL

HOW TO ORDER

3D MODELING

Certificates

공유하기